Problem Solved DTF Transfer ONLY - This is NOT a T-Shirt

**This is a DTF Transfer only**

YOU MUST USE A COMMERCIAL HEAT PRESS FOR ALL TRANSFERS SOLD IN THIS STORE.

A CRICUT EASY PRESS OR AN IRON WILL NOT WORK!

**This is a DTF Transfer only**

Heat your press to 320-330° F depending on your press.

We recommend starting with a lower temp and going to a higher temp as needed. Some commercial heat presses run hot. Some commercial heat presses have cold spots. To find what temperature works best with these DTF transfers, we recommend testing your commercial heat press (in multiple areas) with a heat gun.

Roll your garment or novelty (as applicable) with a fabric roller to remove as much lint as possible. Pre-press the garment or novelty (as applicable) for approximately 8 seconds before adding the transfer to remove moisture.

Position the transfer down flat with the ink facing the garment or novelty (as applicable). The image should be facing you.

Press with extremely heavy pressure for 15 seconds.

Remove from the commercial heat press. For a seamless peel, after cooling completely, peel the transfer film away from the garment or novelty (as applicable).

Place the garment or novelty back onto the commercial heat press & depending on the desired effect, cover the design with Butcher paper or a Teflon sheet. Final Press time 10 - 15 seconds.